14 November 2026
Rimshot Friendly Sticks: What to Look For and How to Play

Rimshot Friendly Sticks: What to Look For and How to Play

A rimshot-friendly stick is a stick with enough body in the shaft to take repeated contact with the rim, a taper and weight you can control at volume, and a size that fits your hand. In practice that usually means a medium-to-thick hickory or oak pair, matched in weight, with a tip that gives you the attack you want. We build and supply sticks for drummers every day, and the London Drumstick Company range we distribute in the UK is where we would start your search: browse the drumsticks.
This guide covers what a rimshot actually asks of a stick, which design features matter, how to place the stick so it lasts longer, and when to retire a pair. It is written for drummers at every level, and for shops deciding what to keep on the wall.
TL;DR
- A rimshot lands the tip on the head and the shaft on the rim at once, so the shaft takes the wear. Choose thicker, denser sticks if you hit hard.
- 5A is a sound starting size. Heavy hitters may do better with a 5B or 2B, which have more wood under the hand.
- Match pairs within 1 to 2 grams so both sticks hit the rim the same way.
- Vary where on the shaft you strike, release the stick after impact, and retire a pair that is badly splintered.
- A cross-stick is a different technique from a rimshot. It uses the shaft too, so the same durability thinking applies.
Table of Contents
- What a rimshot asks of a stick
- Rimshot versus cross-stick: do you need different sticks?
- The features that matter
- A quick comparison by player type
- How to play a rimshot without chewing up the stick
- When to replace a pair
- Custom sticks for rimshot players
- Our view on rimshot sticks
- Getting your pair
- FAQ
- Sources
What a rimshot asks of a stick
A rimshot happens when the tip strikes the drumhead and the shaft hits the rim at the same moment. One drum-teaching site describes the result as a sharp, high-volume attack with a bright, almost metallic overtone layered over the normal snare sound. That is why drummers use it for backbeats and accents.
For your stick, this means three things happen on every hit:
- The shaft takes a sharp, repeated impact in one narrow band.
- The tip and shaft both see force in the same instant, so the stick has to stay stable in your hand.
- Any weakness in the wood, such as uneven grain or a thin neck, shows up at the contact point first.
So “rimshot friendly” is mostly about the shaft, not the tip. Everything below follows from that.
Rimshot versus cross-stick: do you need different sticks?
The two are often confused. The same source explains that a cross-stick is quiet and dry, while a rimshot is loud, and that the cross-stick is written with an “x” note head on the snare line in notation.
The stick requirement overlaps. The shaft is the part used for cross-stick, and in a rimshot it also meets the rim. A drum-technique article notes that many players flip the stick around for cross-stick to get a fuller sound from the base, and that a pinched grip with the fingers just past the sides of the stick keeps the rim from being muted.
In short, you do not need a separate pair for each technique. One well-made, well-matched pair that suits your hand covers both. If you play a lot of cross-stick ballads and loud backbeats in the same set, the thicker end of the size range gives you a solid shaft for both.
The features that matter
Diameter and the numbering system
Stick names combine a number and a letter. The number broadly relates to weight and diameter, and the letter to the tip, though exact meanings differ by maker. That variation is the reason to compare actual measurements rather than trust a label.
For rimshots, diameter is the most useful number. A thicker shaft has more wood between the rim and the core, and it feels steadier when you hit hard. One stick-care guide suggests that hard hitters who find a 5A giving out should try a 5B or 2B instead. If you are not sure where you sit, our drumstick size chart starts you at 5A and shows how to test the fit, and our diameter guide for beginners explains how to check grip comfort in person.
Wood: hickory or oak
Hickory is the common choice for its balance of weight and give. Oak is denser and tends to feel firmer. Which is right depends on how you play and what you want the stick to do on the rim. We cover the trade-offs in oak versus hickory drumsticks, including how each wood suits different playing styles.

Taper and balance
The taper is how the shaft narrows toward the tip. A longer, slimmer taper gives more flex and rebound. A shorter, thicker one keeps more mass behind the strike and stays stiffer. For rimshots, many drummers prefer a taper that keeps the stick feeling solid at the point where it meets the hoop. Our taper explainer compares 2.25-inch and 3-inch taper benchmarks and gives a four-step test you can run on any pair.

Weight matching
If one stick is heavier than the other, your hands will compensate, and the lighter one often ends up hitting the rim at a different angle or depth. We recommend a match within 1 to 2 grams, which also helps you avoid fatigue across a long set. If you are weighing a stick for marching versus kit use, the marching versus drumset guide covers the same matching idea.
Tip shape
The tip decides the tone on the head: a rounder tip sounds fuller, a smaller one sounds more focused. It does not change how the shaft meets the rim, so pick it for sound and leave durability to the shaft.
A quick comparison by player type
| Player | Starting point | Why |
|---|---|---|
| Beginner learning backbeats | 5A in hickory | Easy on the hand while you build rimshot control |
| Rock or loud-gig drummer | 5B or 2B, hickory or oak | More wood under the rim contact |
| Jazz or low-volume player | 5A, focus on cross-stick feel | Rimshots are occasional, so touch matters more |
| Small-venue player | Stick sized to the room | See our small venue stick guide |
These are starting points, not rules. Your grip, your snare height and how often you rimshot all shift the answer.
How to play a rimshot without chewing up the stick
Even the best pair wears where it meets the hoop. Repeated rimshots can wear a stick at the contact point, especially when you strike hard at the same spot. A few habits make the pair last.
- Find the right spot. Hit about four inches in from the rim toward the center of the head, so the tip and shaft land together. If the tip is too close to the rim, the shaft takes an awkward, glancing blow.
- Rotate the stick. Turn the stick slightly or shift your grip so the contact point moves. A single deep notch is where most breaks begin.
- Shift the contact point along the shaft. The same guide recommends varying the position once the stick is badly notched.
- Release after the hit. Letting the stick rebound instead of pressing into the rim reduces shock to the shaft and your hand.
- Save rimshots for accents. Rimshots on every backbeat will wear a stick faster than rimshots on selected hits. They also add more dynamic contrast.
- Mind your snare height. A snare set slightly lower can change where the shaft meets the hoop, so check that the angle feels natural before you commit.
What about the hoop?
Hoops come up in every rimshot discussion. Some drummers like stick-saver style hoops because they are designed to slow wear. It is worth knowing, though, that changing to die-cast hoops is not a reliable fix for breakage. Choose a hoop for the sound and feel you want, and put your effort into stick choice and technique.
When to replace a pair
Rimshot wear is normal, and a worn pair is a signal to change sticks, not a mistake. One drum teacher lists severe rimshot splintering among the reasons to replace sticks, and warns that splinters can injure your hand. Safe-use rules of thumb:
- Retire a stick that has long splinters or a deep split near the rimshot area.
- Run a finger along the shaft before a gig. Catch rough or lifting wood before it catches your palm.
- Do not use a cracked stick for rimshots. It can snap mid-hit.
- Keep spares within reach. Our gig-ready stick bag checklist starts with three pairs and a drum key.
Custom sticks for rimshot players
If stock sizes never quite fit, a made-to-measure pair removes the compromise. Our custom drumsticks let you configure the stick yourself, so you can choose a shaft that suits the way you strike the rim. It is a practical route for players who already know they like a thicker neck or a particular taper and want that in every pair.
Our view on rimshot sticks
We spend our days around sticks and the people who break them, and the pattern is simple. Drummers who rimshot a lot do best when they stop shopping by label and start shopping by feel: diameter, wood, taper and weight.
That is why we think the right pair is the one you have matched and tested in your own hand. The shaft is the working part in a rimshot, so it deserves the attention most players give the tip.
The London Drumstick Co. range we distribute exclusively in the UK, along with custom builds, gives you room to find that pair instead of settling for the nearest stock size. For shops, it means carrying a spread of diameters rather than one hero model.
Will
Getting your pair
We supply the London Drumstick Company range and handcrafted Alchemist Cymbals, to individual drummers and to trade customers. If you want to try a few diameters or build your own stick, start in the drumstick collection. Membership is optional: Pro Member is £4.99 per month and VIP Member is £9.99 per month, with a Free Member tier as well, all set up from the Temple of Sound home page.

Shops and retailers can ask us about trade accounts through the same site, so that a range of diameters is on your shelf for players who rimshot.
FAQ
What size stick is best for rimshots?
Most players start with a 5A and move up to a 5B or 2B if they hit hard and want more wood in the shaft. One stick-care guide gives the same advice for heavy hitters. Because sizing labels vary by maker, check actual diameter and weight.
Can I use the same sticks for cross-stick?
Yes. Cross-stick uses the shaft against the rim, and a rimshot puts the shaft on the rim as well, so one sturdy pair serves both. Flipping the stick for cross-stick gives a fuller sound from the thicker end.
Why do my sticks splinter at the same spot?
That is where the shaft meets the hoop on each rimshot. Strike slightly differently, rotate the stick, release after the hit and keep the contact point moving. Replace a badly splintered stick rather than playing through it.
Does the hoop type change how long sticks last?
Hoops change the sound and feel more than they change stick life. A die-cast hoop is not a dependable cure for breakage, so choose it for tone and let stick choice and technique do the work.
Are rimshot sticks different from normal sticks?
Not in a special way. Rimshot-friendly simply means a shaft sturdy enough, and matched well enough, for repeated rim contact. Diameter, wood, taper and weight matching are what to compare.
Sources
- How to Play Snare Drum: Techniques, Beats, and Exercises
- 5 Beginner Drum Techniques
- Drum stick
- How to Keep Your Drumsticks From Breaking
- Replace drumsticks: when and why